F43 – JOINT GROUT CLEANSING MACHINE – 0,55HP 230V ENGINE – SUPPLIED WITH A FREE BROWN SPONGE BELT ART. 1303 – MECHANICALLY CLEANSES THE FLOOR AFTER JOINT GROUT LAYING CAREFULLY SIMULATING TRADITIONAL HANDWORK – UNIQUE RINSING SYSTEM FEATURING DIRECT ON-SPONGE WATER PUMPING, WITH FLOW ADJUSTMENT TAP – OPTIONAL CLEAN WATER TANK AND BATTERY PACK
Ghelfi F43 electrical cleansing machine solves the joint grout cleansing problem for any type of floor.
F43 is an essential tool for any professional floor installer, who has to face all new grouting and cleaning challenges: wide joints, absorbant tiles (e.g. cotto) are just a few examples.
The system’s design elaborates on the idea that the cleansing action performed by a machine should be as similar as possible to the manual action executed by a professional installer with a float-trowel. Therefore F43 is equipped with a special belt that works transversely to the machine movement direction, rubbing the floor and performing the cleaning action at maximum efficiency. The sparse grout collected by the sponge is automatically moved into a tank, leaving the floor immediately clean.
Joint height and its smoothing are adjustable by the operator depending on the type of floor. The system is structured so that the height setting is kept unmodified whichever cleaning speed or operator pressure variations are applied by the professional on the machine.
A pump brings water directly onto the sponge belt, thereby reducing foam production and liquid consumption when compared to more traditional machines. A tap allows for easy adjusting of liquid flow depending on the type of floor and/or grout on which opeations are conducted.
|Supplemental clean water tank (Optional)
Extends duty cycle and increases operational quality.
|Battery pack and charger (Optional)
Allows for maximum movement liberty, as the device becomes independent from supply chords.
|F43||F43 JOINT GROUT CLEANSING MACHINE|