F.048
Electrical wet table saw recommended for cutting poroton, bricks, tuff and concrete artifacts.
- Italian high-quality single-phase 220-230V 3HP (2.2KW) engine
- Direct to disc transmission
- Supports Ø350 and 400mm blades
- Max cut depth : 13.5cm in a single pass, 24.0cm in a dual pass (Ø400mm blade)
- Weight: 71kg+
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Cart sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for calibrating cut thickness safely and easily
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides, and on its front
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Made in Italy
F.048 - spec sheet (ENG)Description
Electrical sliding-cart wet saw machine ideal for cuts on bricks, poroton, tuff, and concrete artifacts.
Equipped with a 3.0HP (2.2KW) 220-230V engine, with direct-to-disc transmission, supports Ø 350 and 400 mm blades. Depending on blade size it can cut up to 110 (135) mm deep in a single run, or 240 mm in a dual run. It is capable of a max cutting length of 70cm.
All Ghelfi cutting machines are designed, manufactured and assembled in our production plant in Bologna, the same place where for decades we have been accruing an evolving experience in research, design, implementation and assistance about machinery and accessories needed every day by tililng, flooring and masory contractors.
We serve the most demanding professionals, and customers with unusual requirements, building on-demand full-customized machines, or variations of our mainstream models.
Why is F.048 the best choice for cutting bricks, poroton, tuff, and concrete artifacts with perfect results?
ALUMINIUM CHASSIS
The machine’s main chassis is made of extruded aluminum profiles, and is therefore immune to rust, much more robust, and even much lighterweight when compared to traditional and/or lower quality machines, based on iron structures. Lastly and perhaps most importantly, aluminium profiles are virtually undeformable even when the machine is heavily loaded and placed on uneven surfaces, all this resulting in much higher cut precision over the entire product lifetime.
SLIDING CART
The large sliding cart (50×50 cm) is made of painted steel and covered with rubber to enhance material stability during cutting. Movement is ensured by four special armored stainless steel ball bearings sliding on two stainless steel guides. The wear resistance is extremely high, making maintenance or replacement virtually unnecessary, except in truly exceptional cases. An anti-tip device is installed on both sides.
SINGLE-PHASE MOTOR
The 3 HP single-phase motor provides all the power needed on-site to cut not only all types of bricks and blocks but also more demanding materials
WATER TANK
The water tank is made of Polyethylene, a very strong plastic material featuring superior resistance to low and high temperatures, and non-deformable. Unlike its lower quality metallic alternatives it is impervious to rust, and does not leak. Equipped with a handy screw-cap, virtually impossible to accidentally be removed, it is easy to clean.
MITRE (45°) CUT
The cutting unit is tiltable sideways to allow for 45° “Mitre” cuts.
VERTICAL SWING ADJUSTMENT
The vertical swing of the cutting unit enables the operator to easily adjust the cutting depth to the desired value.
MECHANICAL SAFETY GUARDS
A front guard and bilateral tilting metal protections are installed on the cutting unit to reduce water dispersion, water splash, and moreover to contribute protecting the operator from accidental blade or debris contact.
ELECTRICAL SUBSYSTEM
The main electrical switch includes a magneto-thermal safety device protecting the engine from overheats/overloads. Also, a release coil prevents from accidental switch-ons following unexpected power supply breaks. In case of erratic electricity supply flow – e.g. due to an underspecced generator, or a too long / too thin power chord – as well as in case of engine overheating the switch’s Green button will automatically go off, thereby protecting the user and the machine itself from the dangers of continued operations under non-regular conditions. The same happens in case of sudden electrical supply loss, to avoid the engine to restart without notice as soon as the line is restored.
MAGNETIC INDUCTION WATER PUMP
Due to its particular technology, our pump will not fail/burn even in case of hard jamming. Unlike traditional electrical pumps it is extremely reliable, and maintenance free.
LEGS AND WHEELS
Legs are based on sturdy rectangular metallic tubulars, particularly valuable in supporting heavier stone materials. To facilitate handling and transportation all legs are retractable vs the work surface to reduce overall system size. They also feature a special fall-protection system easing operations even to a lone user. Rear legs are equipped with wheels to ease local machine movements.
Supports Ø 350/400 mm diamond blades
Tiltable cutting head to facilitate Mitre cuts
Maximum cut depth 24cm in 2 passes
Cart size:
Width 50 cm
Length 50 cm
Retractable legs easing transport
PRODUCT RANGE
| SKU# | DESCRIPTION |
|---|---|
| F.048 | F.048 – SLIDING CART WET SAW 3HP 230V ENGINE, SUPPORTS Ø350/400 BLADES, SUPPLIED W/O BLADES |
