SPF – THE LEVELLING WEDGE IN THE CORNER

SPF is the wedge levelling system for tiles and slabs, installed under tile corners.

  • Wedge technology
  • Single-use base clips in linear shape
  • Additional tabs to insert into the clips for installation under tile corners
  • Patented SPF wedge also compatible with other wedge levelling systems
  • No tightening plier required
  • Recommended for both floor and wall tiling
  • Usable on tiles and slabs of any size
  • Supports both interior and exterior tiling
  • Handles tiles from 2 to 15 mm thick
  • Built-in spacers for 1.5, 3 or 5 mm joints
  • Patented
  • Made in Italy

Description

SPF, the levelling wedge in the corner
SPF "Posa Facile" compared with the traditional system

What it is for

SPF is the wedge levelling system installed under tile corners: it is used to ensure, with a single item, both lippage-free tile laying and joint width regulation, in floor and wall tiling.

Makes tile laying faster, easier

SPF levels and spaces: diagram of the base between tiles

A SINGLE ITEM to ensure both lippage-free tile laying and joint width regulation IN ONE SHOT !

  • You can use it on all types of tiles from 2 mm up to 15 mm thick
  • It helps you for straight, running bond or diagonal installation patterns
  • The tile spacer is incorporated : SPF is all you need to settle joints of 1.5 / 3 / 5 mm width
  • Ideal for both floors and wall coverings.
Patented, Made in Italy

Components

The reusable universal Wedge

SPF Universal Wedge fits all wedge-technology Ghelfi Tile Levelling Clips, and virtually all third-party clips. You can insert and tighten it with your bare hands, no pliers are needed. It’s designed to be recovered, so you can reuse it countless times and save.

Double levelling wedge

The levelling clip

SPF disposable Levelling Clips suit tiles from 2 to 15 mm thick, and come with a built-in tile spacer. You can pick your preferred joint width – 1.5 / 3 / 5 mm – choosing the right color !

SPF bases in three colours

The angle tab

Add an extra item, called SPF Angle Tab, to the Levelling Clip to install it under each tile’s corner, saving loads of money and time. Angle Tabs are built to match the Clip’s joint width: 1.5 / 3 / 5 mm.

SPF tabs in three colours

How to use it

1. Choose and prepare the clips

SPF, step 1: choose and assemble the bases

2. Slip them under tile corners

SPF, step 2: place the bases under the corners

3. Push wedges all the way in

SPF, step 3: insert the wedges

4. Later, kick-break the top off

SPF, step 4: kick off the bases

5. …and you are done (already) !

SPF, step 5: the finished floor checked with a level

Very low cost per square meter

Just very few clips needed !

SPF is designed to be preferably installed under tile corners, thus requiring surprisingly few Clips and Tabs to obtain a perfectly lippage-free and regular-joint professional result. Fewer Clips means substantial money and time savings !

Remember that SPF Wedges are designed to be recovered and reused many times: for each subsequent job only very few Clips and Angle Tabs are strictly needed, according to your tiles’ size. Don’t forget to count a few extra Clips in for walls, angles and glitches.

Save on straight bond…

SPF is quick and inexpensive

Straight laying with SPF, step 1: one base per corner

1. Install complete bases instead of traditional spacers. Just 1 per corner. That’s it!

Straight laying with SPF, step 2: insert the wedges

2. Insert and tighten the levelling wedges. See how quick the whole process is.

SPF consumption table for straight laying: pieces needed by tile size (cm)

Check just how few bits are needed for a straight bond, depending on tile sizes.

The “old”, longer and more expensive way

Straight laying with a traditional system, step 1: spacers

1. Install traditional X spacers, and….

Straight laying with a traditional system, step 2: bases near the corners

2. …install clips in addition to them. Typically as many as 4 per corner !

Straight laying with a traditional system, step 3: levelling wedges

3. Install and tighten levelling wedges. See how many they are, and how long is the process.

…and on running bond, too

SPF is best yet again

Staggered laying with SPF, step 1: bases instead of spacers

1. Install SPF Clips instead of traditional spacers, without using Angle tabs. Put just 1 under every other “T”. Add an extra base on each short tile side, as in the scheme above.  That’s it.

Staggered laying with SPF, step 2: wedges on the corner bases

2. Insert and tighten the levelling wedges onto “T” corner bases. Very few ones, as no wedge is even needed on short tile sides. See how quick it all is !

SPF consumption table for staggered laying: pieces needed by tile size (cm)

Check how just few bits are needed for a running bond, depending on tile sizes.

The “old”, longer and more expensive way

Staggered laying with a traditional system, step 1: spacers

1. Install traditional T spacers, and….

Staggered laying with a traditional system, step 2: bases near the corners

2. …install SPF Clips in addition to them! Typically as many as 3 near each “T” !

Staggered laying with a traditional system, step 3: levelling wedges

3. Install and tighten levelling wedges. A lot of them. See how many items you need, and how long the process is.

Product range

Disposable base clips

SKU# DESCRIPTION
2241 SPF – PATENTED LEVELLING CLIP 1.5 MM JOINT – 200 PCS BAG
2243 SPF – PATENTED LEVELLING CLIP 3 MM JOINT – 200 PCS BAG
2245 SPF – PATENTED LEVELLING CLIP 5 MM JOINT – 200 PCS BAG

Angle tabs

SKU# DESCRIPTION
2251 SPF – ANGLE TAB 1.5 MM JOINT – 200 PCS BAG
2253 SPF – ANGLE TAB 3 MM JOINT – 200 PCS BAG
2255 SPF – ANGLE TAB 5 MM JOINT – 200 PCS BAG

Levelling wedge

SKU# DESCRIPTION
2941 SPF – PATENTED REUSABLE UNIVERSAL LEVELLING WEDGE – 200 PCS BAG

Leave your contact to receive further information or a quote.